CAME BPT TA/350 - Temperature Management Algorithms; Configuring Differential Algorithm

TA350
E
F
TA350
G
ON ON
OFF
1 h
Page 18 - Manual FB00942-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Setting the type of temperature management algorithm
The device allows you to choose the type of algorithm to be applied for system management
from dierential and integral proportional.
Activating and configuring a dierential algorithm
Temperature
+ dierential
setpoint
- dierential
setpoint
Setpoint
Time
This control system is recom-
mended in systems that are par-
ticularly dicult to control with
extreme variations of the external
temperature.
With the device in
O mode, press button
P until the
indication appears on
the display E.
Use the
buttons to activate/deactivate
the dierential algorithm F.
= Active
= Not active
When the dierential is active (
),
press button P on the screen to read the
value of the temperature dierential set
-
ting G.