C
A
B
Page 16 - Manual FB00942-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Manually forcing the desired temperature
With any active temperature management
program (Eco, Comfort, Night), use the
buttons C to change the desired pro-
grammed temperatures.
The new desired temperature is displayed
instead of the detected temperature.
Any icon of the active program and the active
user (
) disappear to indicate that the
programming has been edited.
After the screen timeout, the detected temperature reappears.
N.B. Forcing remains valid until the next change of temperature management program.
Setting the operating mode
Press the button A to choose the
operating mode for the thermal zone.
Heating.
Cooling.
O.
OFF mode
The icon lighting up confirms that the
thermal zone has been excluded from
system control.
For 5 seconds, the room temperature indica
-
tion B disappears.
N.B. In OFF mode, the frost protection control
is still active.
To Next Page
Loading...
Need help?
General
