What does it mean if the PROGRAMMING LED stays lit on my CAME Garage Door Opener?
If the PROGRAMMING LED stays lit on your CAME Garage Door Opener, it indicates an NC control button instead of NO (2-7).
How to fix a CAME Gate Opener transmitter that is not working?
If your CAME Gate Opener's transmitter isn't working, try checking the bridging on the AF card by cutting off the power and then powering it up again. If that doesn't work, try memorizing the transmitter again.
What to do if the PROGRAMMING LED flashes rapidly on my CAME VER12 Gate Opener?
If the PROGRAMMING LED on your CAME Gate Opener flashes rapidly, it could be due to the N.C. safety contact (2-C1) being open or the encoder not working. Try cutting off the power to the control board and then powering it up again. Also, check the encoder connections to ensure they are correct.
Why is the POWER-ON alerting LED off on my CAME VER12?
If the POWER-ON alerting LED is off on your CAME Gate Opener, check the power supply and line fuses. Also, verify that the (1-2) NC safety contact is open.
How to troubleshoot CAME Garage Door Opener that doesn't open or close?
If your CAME Garage Door Opener isn't opening or closing, check the power supply and line fuses. Also, verify that the (1-2) NC safety contact is not open.
Why does my CAME Garage Door Opener invert travel direction at the limit switch?
If your CAME Garage Door Opener inverts the travel direction at the limit switch, check the proper direction of the door travel, eliminate all mechanical friction and check the door balancing.
Why does my CAME Garage Door Opener push too weakly or invert direction?
If your CAME Garage Door Opener pushes too weakly or inverts the direction of travel, adjust the sensitivity. Also, eliminate all mechanical friction, check the door balancing, and check the tautness of the belt/chain.
What to do if the POWER-ON alerting LED is off on my CAME Garage Door Opener?
If the POWER-ON alerting LED is off on your CAME Garage Door Opener, check the power supply and line fuses. Also, verify the (1-2) NC safety contact is open.
Why is my CAME Gate Opener pushing weakly or inverting direction?
If your CAME Gate Opener is pushing too weakly or inverting the direction of travel, try adjusting the sensitivity. Also, eliminate any mechanical friction, check the door balancing, and check the tautness of the belt/chain.
Why is the photocell not working on my CAME Garage Door Opener?
If the photocell is not working on your CAME Garage Door Opener, it may be because The N.C. safety contact (2-C1) is open. Check proper functioning of the photocell.
Checks and considerations before commencing the installation process.
Demarcating the site, handling heavy units, and correct command placement.
Ensuring EN 12453 compliance and verifying safety device functionality.
Explanation of DIP switch functions for various programming modes.
General| Brand | CAME |
|---|---|
| Model | VER12 |
| Category | Gate Opener |
| Language | English |
To Next Page
