C&T Solution CT-MCL01 Series - USB3.0 Connector (USB56); Bit GPIO Header (JDIO1)

CT-MCL01 l User’s Manual
33
Chapter 1: Product Introductions
1.7.8 USB3.0 connector (USB56)
This connector provides 2 port USB3.1 Gen1 port. Connect the optional USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system chassis. These
USB connectors comply with USB 3.1 Gen1 specification that supports up to 5Gbps connection speed.
1.7.9 8 bit GPIO header (JDIO1)