C&T Solution CT-MCL01 Series - Boot Option; Trust Computing

CT-MCL01 l User’s Manual
41
2.8 Boot Option
2.9 Trust Computing
Chapter 2: BIOS Setup
Boot Option
Item Description Remarks
Setup Prompt
Timeout
The item controls the delay time (in seconds) in the POST
screen until user press DEL / ESC key to enter BIOS setup
menu. The range for the value is from 1 to 65535.
Quite Boot
When Quite Boot is Disabled, the BIOS information will be
shown in the POST screen. When Quite Boot is Enabled, the
Black Logo will be shown in the POST screen.
Trust Computing
Item Description Remarks
TCG/TPM Support
•
Support TPM/TCG 2.0
•
This is the main item to control whether the TPM function
is supported or not.
Execute TPM
Command
•
Activate or Deactivate command to TPM
•
Three commands are supported, Don’t Change, Enabled,
and Disabled.
Clearing the TPM
•
Clearing the TPM is the process of returning the TPM to
factory defaults. It is possible the platform owner will
change when in this state.