Canon EOS-1V HS User Manual

There are three ways to use the < >:
1. While holding down a button, turn the < > dial.
2. After pressing and releasing a button, turn the < > dial.
3. Just turn the < > dial.
Look at the LCD panel to confirm the setting.
To restore the button's function or to ready the camera for picture taking,
turn the < > dial.
The < > is used to set the following:
1. Real-time exposure compensation
2. Aperture
3. Flash exposure compensation
4. Focusing point selection
The < > dial functions only when the < > switch is set to < >.
<>:Set to this position to disable the
<>.
<>:Set to this position to enable the
<>.
With the EOS-1V, you can set the shooting mode, metering mode, and
other settings as you wish. You can also use Custom Functions (→p.95) to
customize camera controls and functions according to your preferences.
These preferences can be reset to the default settings with the following
procedure.
17
Basic Operation
Reverting to the Default Settings
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 17

Canon EOS-1V HS Specifications

General

Film Format	35mm
Flash Sync Speed	1/250 sec
Viewfinder Coverage	100%
Built-in Flash	No
Weight	945g (body only)
Type	SLR
Lens Mount	Canon EF
Shutter Speed	30 - 1/8000 sec, Bulb
ISO Range	6 - 6400
Metering Modes	Evaluative, Partial, Spot, Center-weighted Average
Focus Modes	One-Shot AF, AI Servo AF, Manual
Focusing System	45-point AF system
Continuous Shooting	10 fps
Battery	2CR5