Canon EOS-1V HS User Manual

23
1
Press the < > button to set the
film ID setting mode.
• Each time you press the button, the
following icons will be displayed in
turn on the left side of the LCD panel.
Display the icon.
The blinking number is the user-
settable No.
• After the film advances to frame 1,
the user-settable No. will be
displayed and it cannot be changed.
2
Turn the < > dial to set the
desired user-settable No.
• You can set any number from to
.
• The film roll No. is set sequentially
from to . After , it will
start from again.
User-settable No.
Film roll No.
Film ID Imprinting
Be sure to set the user-settable No. before loading the film. The film ID is
imprinted automatically as it advances to frame 1 after loading. You cannot set
the user-settable No. once the film has been loaded. You also cannot set the
film roll No.
User-settable No.
Film roll No.
Imprinting position
ID icon
PF icon
Data transfer icon
Frame 1
: Multi Function. This
refers to the EOS-1V’s
extended functions.
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 23

Canon EOS-1V HS Specifications

General

Film Format	35mm
Flash Sync Speed	1/250 sec
Viewfinder Coverage	100%
Built-in Flash	No
Weight	945g (body only)
Type	SLR
Lens Mount	Canon EF
Shutter Speed	30 - 1/8000 sec, Bulb
ISO Range	6 - 6400
Metering Modes	Evaluative, Partial, Spot, Center-weighted Average
Focus Modes	One-Shot AF, AI Servo AF, Manual
Focusing System	45-point AF system
Continuous Shooting	10 fps
Battery	2CR5