Canon EOS 2000D - Page 84

84
Connecting to a Detected Network Manually
4
Select an access point.
 Press the <W> <X> keys to select
the access point to connect to from
the list of access points, then press
<0>.
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
 Scroll down the screen in step 4 to display [Refresh] and [Manual
settings].
 To search for access points again, select [Refresh].
 To configure settings for the access point manually, select [Manual
settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
(1) (2) (3)
For [Camera access point mode] displayed in step 4, see page 88.