2.9 T
OP COVER
UNIT DISASSEMBLY 1
Fig. 3-36 Top cover unit disassembly 1
Part 3: Repair Information
3-24
4.6mm
5.0mm x4
3.0mm
3.0mm
4.0mm
4.5mm
4.5mm x2
★NK-74C
Spring hooks
★NK-74C
Gear and friction
surface
★NK-74C
ST case friction
surface
★NK-74C
Top cover and
friction surface. None
in screw hole.
★NK-74C
Top cover and
friction surface. None
in screw hole.
★Bond 1663G Black
After soldering the
POP-END flex, apply
on the two positioning
dowels.
Check that the TOP flex and
dioptric adjustment gear are
not being obstructed (lightly
fold the flex).
★NK-74C
Gear shaft
★NK-74C
ST case friction
surface
★Bond 1663G Black
Apply on hot shoe spring.
No seepage outside.
★Bond 1401C
Apply on screw head
★Bond 1663G Black
Fix lead wires in place
★Glue with Bond
1663G Black
★Aron Alpha 201 (Temporary fix)
+ Bond 1663G Black
Fix POP-UP switch
NOTE 4
NOTE 4
To Next Page
