Canon EOS 7 - DESIGN SPECIFICATIONS

Part 1: General Information
1-12
4. DESIGN SPECIFICATIONS
1. Type
1-1 Type: 35mm AF/AE single-lens reflex camera with focal-plane
(vertical travel) shutter and built-in motor drive and
flash.
1-2 Picture size: 24 mm ✕ 36 mm
* No panorama mode.
1-3 Compatible lenses: Canon EF lenses (Max. aperture metering. No stop-down
metering.)
1-4 Lens mount: Canon EF mount
1-5 Standard lens: Canon EF 28-105mm f/3.5-4.5 II USM
Canon EF 28-90mm f/4-5.6 (USM)
2. AF
2-1 Type: TTL-CT-SIR (Through-the-Lens Cross-Type Secondary
Image Registration) with ||
—
+
—
|| CMOS sensor.
(TTL secondary, image-forming phase difference
detection)
2-2 Focusing points: 7 (Extreme left, left, top, center, bottom, right, extreme
right)
2-3 Focusing modes: (1) Autofocus
The following three modes are provided:
1) One-Shot AF
AF operation stops (AF lock) when focus is achieved.
* AF-priority: The shutter can be released only when focus is
achieved.
* With evaluative metering, AE lock is applied when focus is
achieved.
* When a USM lens is used, manual focusing with the
electronic focusing ring is enabled after autofocus is achieved
with One-Shot AF or when focus fails to be achieved.
* One-Shot AF set automatically in the Portrait, Landscape,
Closeup, and Night Scene modes.
2) Predictive AF with AI Servo AF
Tracks subject movement continuously up to the start of
exposure.
* For the first frame during single-frame or continuous
shooting: Shutter release-priority (in Creative Zone modes).
For the first frame during single-frame or continuous
shooting: Focus-priority (in Full Auto and Sports modes).
For the second and subsequent frames during continuous
shooting: Focus-priority.
* No in-focus indicator < ● > and no in-focus beeper.
* When focus fails, < ● > blinks at 2 Hz.
* Predictive AF with AI Servo AF set automatically in Sports
mode.