To Next PageTo Next PageHow to fix AF if it does not work on Canon Digital Camera?
If the autofocus (AF) is not working on your Canon Digital Camera, there are a few potential causes. First, make sure the switch is properly set. Second, check that the lens focus mode is set to AF (or A), not MF (or M). Lastly, verify that Custom Function CF-4 is set to 0, not 1 or 3.
Why is nothing displayed on my Canon Digital Camera LCD panel?
If nothing is displayed on the LCD panel of your Canon Digital Camera, it could be due to several reasons. First, ensure a battery is installed and the switch is set to the correct position. Second, the battery might be exhausted, so replace it with a new one. Finally, check if the battery has been installed correctly and reload it if necessary.
What to do if the film does not load in Canon EOS 3?
If the film does not load in your Canon Digital Camera, it could be due to the switch not being on, so set the switch to the correct position. Alternatively, the film might not have been loaded properly (if blinks on the LCD panel), so try loading the film correctly.
General| Shutter Speed | 30 - 1/8000 sec, Bulb |
|---|---|
| Focusing Modes | One-Shot AF, AI Servo AF, Manual Focus |
| Flash Sync Speed | 1/200 sec |
| Lens Mount | Canon EF |
| Shutter | Focal-plane shutter |
| ISO Range | 6 - 6400 |
| Metering Modes | Evaluative, Partial, Spot, Center-weighted average |
| Exposure Compensation | +/- 3 stops in 1/3 or 1/2 stop increments |
| Film Speed | ISO 6 - 6400 |
| Weight | 780 g (body only) |
| Type | 35mm SLR film camera |
Provides guidelines for cleaning, storing, and protecting the camera.
Details One-Shot AF for still subjects and AI Servo AF for moving subjects.
Covers Automatic, Manual, and Eye-Control selection of focusing points.
Step-by-step guide to calibrate the camera for Eye-Control AF.
How to set the desired shutter speed and let the camera adjust aperture.
How to set the desired aperture and let the camera adjust shutter speed.
Using DEP mode with a manually chosen focus point for depth control.
Using DEP mode with Eye-Control to select focus points for depth control.
How to manually set both shutter speed and aperture for full exposure control.
How to adjust exposure compensation using the camera's dial.
How to adjust exposure compensation using the camera's button and dial.
How to lock the autoexposure meter reading for consistent exposure.
Details E-TTL Autoflash, High-Speed Sync, FE Lock, and other 550EX features.
Procedure for selecting and setting a specific custom function.
Settings for focusing screen compatibility and film rewind modes.
