EasyManua.ls Logo

Canon EOS 7 - Page 34

Canon EOS 7
271 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(6) With a non-Canon flash unit
For compact flash units: Set the sync speed to 1/125 sec. or
slower.
For studio flash: Set the sync speed to 1/60 sec. or slower (test
required).
11-6 Wireless flash: Enabled with 550EX or MR-14EX, or ST-E2 (master unit).
* Three-group (A, B, C) slave control, high-speed sync, FE lock, flash
ratio (A:B) control, FEB, flash exposure compensation, and modeling
flash (with flash ratio) enabled.
* With the ST-E2, two-group (A, B) slave control enabled.
11-7 Flash exposure Settable with camera or EOS-dedicated Speedlite.
compensation: ( ±2 stops in 1/2-stop increments)
* If it is set with both the camera and Speedlite, the Speedlite’s flash
exposure compensation setting takes effect.
11-8 FEB: Settable with Speedlite (550EX, MR-14EX)
* Not settable with camera.
* Any flash exposure compensation set with the camera is not
combined with FEB.
11-9 Modeling flash: Fires (at 70 Hz for 1 sec.) with depth-of-field preview
button when 550EX, MR-14EX, or SPEEDLITE 420EX is
used.
11-10 External display: Large LCD panel on camera top.
11-11 Tripod socket: CU 1/4
11-12 Shutter button lock: Electronic lock when Command Dial set to OFF.
11-13 Remote control terminal: For Remote Switch RS-60E3.
(2.5 mm dia. mini-jack remote control terminal)
11-14
Interchangeable grip
: None.
11-15 Body material: Aluminum and polycarbonate resin with glass fiber.
11-16 Exterior color: Black
11-17 Dimensions: DATE model
146.7 (W) ✕ 103.0 (H) ✕ 69.0 (D) mm
5.78 (W) ✕ 4.06 (H) ✕ 2.72 (D) in.
Non-DATE model
146.7 (W) ✕ 103.0 (H) ✕ 69.0 (D) mm
5.78 (W) ✕ 4.06 (H) ✕ 2.72 (D) in.
11-18 Weight: DATE model: 580g / 20.5 oz.
Non-DATE model: 575g, 20.3 oz.
* Add 32 g / 1.10 oz. for the batteries.
12. Wireless Remote Control
12-1 Configuration: Consists of a built-in sensor in the camera grip and
Remote Controller RC-1 (sold separately).
12-2 Channels/Modes (RC-1): 1 channel / 2 modes, lock
(1) Immediate shutter release /(2) 2-sec. delay
* Mirror lockup is not possible with (1).
12-3 Setting method: Film advance lever set to Self-timer/Remote control.
12-4 Transmission: Enabled with RC-1’s transmission button. (Emits
intermittent infrared light with a peak wavelength of 950
nm.)
12-5 Reception: Via the camera grip’s built-in SPC.
Part 1: General Information
1-27

Table of Contents