3-10
Copying
Registering and Using Combination of Copy Settings (Mode Memory)
You can register up to four combinations of frequently used
copy settings to the “Mode memory” in advance.
IMPORTANT
Registered settings of Mode Memory
• Registered settings in the Mode Memory are saved even during
power OFF.
• When settings which require the options are registered in a
Mode Memory, the memory becomes unavailable if that option
is removed, but its settings remain saved.
• When an optional drawer usage is registered in a Mode Memory,
the paper feeding setting is changed to Drawer 1 if that optional
drawer is removed.
Registering Mode Memory
Keys to be used for this operation
COPY
OK
1 Press [ ].
2 Select <Mode Memory> using [ ] or [ ] and
press [OK].
Copy: Press Start
100% LTR
Erase Frame: Off
Sharpness: 0
Mode Memory: Off
1
1
+
-
3 Select <Register/Delete> using [ ] or [ ] and
press [OK].
Mode Memory
Register/Delete
Mode 1
Mode 2
Mode 3
4 Select the place to register using [ ] or [ ] and
press [OK].
* Select any registered place, then you can edit settings.
Register/Delete
Mode 1
Mode 2
Mode 3
Mode 4
5 Select items to specify using [ ] or [ ] and press
[OK].
Mode 1
<Apply>
<Delete>
No. of Copies: 1
Density: 0
+
-
For details on the settings, see “Copy Settings” (→P. 3-4).
6 Select <Apply> using [ ] or [ ] after you have
specified the setting and press [OK].
Mode 1
<Apply>
<Delete>
No. of Copies: 1
Density: 0
+
-
7 Select <Yes> using [ ] and press [OK].
Register?
NoYes
* Follow the same steps for overwriting settings as well.
Deleting Mode Memory
Keys to be used for this operation
COPY
OK
1 Press [ ].
2 Select <Mode Memory> using [ ] or [ ] and
press [OK].
Copy: Press Start
100% LTR
Erase Frame: Off
Sharpness: 0
Mode Memory: Off
1
1
+
-
To Next Page
Loading...
