imageCLASS MF230 Series Service Guide for ASF
imageCLASS MF230 Series Service Guide for ASF September 2016
Page 12
F. Service Support Tools
The only tools required for servicing the imageCLASS MF236n/MF232w are
part of the technician’s standard tool set. No special tools are required.
The oil in the table below should also be carried to ensure the imageCLASS
MF236n and MF232w are serviced properly. For more information on the oil
below, see the imageCLASS MF 230 Series Service Manual.
Table 7 — Oil
Ethyl Alcohol -
• Cleaning of metal parts, grease, and toner
• Procure locally
Lubricant HY9-0007
• Apply to the gears, shafts, and shaft supports.
• Molykote EM-50L (Dow Corning Corporation)
2 Item numbers and part numbers are subject to change without notice.
G. Cleaning
The imageCLASS MF236n and MF232w do not have parts which require
cleaning during a service visit. If the platen glass becomes dirty during
servicing, clean the glass with a dry, lint-free paper.
H. Periodic Replacement Parts
The imageCLASS MF236n and MF232w do not have parts that require
periodic replacement.
To Next Page
Loading...
