4-9
Sending Faxes
Editing One-Touch Speed Dialing Keys/Coded Speed Dialing Codes
1 Press [Additional Functions].
2 Press [ ] or [ ] to select <ADDRESS BOOK SET.>, then press [OK].
3 Press [ ] or [ ] to select <1-TOUCH SPD DIAL> or <CODED DIAL>, then
press [OK].
4 Press [ ] or [ ] to select the one-touch speed dialing key (01 to 08) or
coded speed dialing code (00 to 99) you want to edit, then press [OK].
You can also select a one-touch speed dialing key or coded speed dialing code by pressing the
corresponding one-touch speed dialing key, or [Coded Dial] followed by the two-digit code.
●
To Next Page
Loading...
