Machine Settings
12-18
SYSTEM SETTINGS
Setting Item Description
1. SYS. MANAGER INFO Sets the system manager information to protect the contents
of <SYSTEM SETTINGS>. Once the system password is set, they
must be entered every time you access the <SYSTEM SETTINGS>
menu.
1. SYSTEM PASSWORD Sets the system manager password (seven digits).
2. NETWORK SETTINGS Sets the network setting. (See Chapter 6, “Network,” in the
Reference Guide.)
1. TCP/IP SETTINGS Sets TCP/IP network.
1. IP ADDRESS AUTO. Sets whether to automatically set an IP address.
ON Enables an IP address to the machine automatically.
1. DHCP (ON/OFF)
2. BOOTP (OFF/ON)
3. RARP (OFF/ON)
–
–
–
OFF Allocates an IP address to the machine manually.
2. IP ADDRESS Registers a fixed IP address to the machine. (See Chapter 6,
“Network,” in the Reference Guide.) (000.000.000.000)
3. SUBNET MASK Registers a fixed subnet mask to the machine.
(000.000.000.000)
4. GATEWAY ADDRESS Registers a fixed gateway address to the machine.
(000.000.000.000)
5. LPD PRINT Sets whether to use LPD as the print application.
ON
OFF
–
–
6. RAW PRINT Sets whether to use RAW as the print application.
ON Enables to use RAW.
OFF Disables to use RAW.
To Next Page
Loading...
