4-5
Sending Faxes
Density
The default setting is (5).
1 Press [FAX].
2 Press [Density].
3 Press [ ] or [ ] to adjust the density, then press [OK].
Ex.
D E N S I T Y
- L T D K +
[ ]: to make dark documents lighter.
[ ]: to make light documents darker.
These settings return to the default values after all documents are scanned. If you want to keep the
settings, set the image quality and/or density as follows:
[Additional Functions] <FAX SETTINGS> <USER SETTINGS> <STANDARD SETTINGS> <Image
Quality> or <DENSITY> (See “STANDARD SETTINGS,” on p. 12-10.)
To Next Page
Loading...
