12-21
Machine Settings
SYSTEM SETTINGS
3. COMMUNICATIONS Specifies the fax settings.
1. MEMORY LOCK Sets whether to receive and store all documents in memory
and not to print automatically. (See Chapter 4, “Sending and
Receiving,” in the Reference Guide.)
OFF Disables memory lock reception.
ON Enables memory lock reception.
1. PASSWORD Registers the password that protects the authority for accessing
to memory.
2. MEMORY RX TIME Sets whether to set a period for memory lock reception.
OFF Disables setting a period of memory lock reception.
ON Enables setting a period of memory lock reception.
MEM RX START TIME
MEM. RX END TIME
–
–
4. ACCESS TO DEST. Sets restriction of the access to destinations.
1. RESTRICT REDIAL Sets whether to disable the redial function of the [Redial/Pause]
key.
OFF
ON
–
–
2. CONFIRM FAX NO. Sets whether to confirm the entered fax numbers each time you
send a fax.
OFF
ON
–
–
5. UPDATE FIRMWARE This function is used only when the machine firmware needs to
be updated.
To Next Page
Loading...
