4-3
Sending Faxes
Enter the Fax Number Send the Document
Enter the fax number with the
numeric keys.
You can also specify the fax number with one-touch
speed dialing key, coded speed dialing, or [Address Book]
key. (See “Specifying Recipients,” on p. 4-22.)
Press [Start].
When you set the document on the platen glass, press
[Start] for each document. When scanning is complete,
press [OK] to start dialing.
Ex.
= 0 1 2 X X X X X X X
You enter a wrong number:
Go back to the wrong digit with [ ],
then press [Clear] to delete it. Or press
and hold [Clear] to delete the entire entry.
Then try again.
●
You want to cancel sending:
Press [Stop/Reset] on the operation panel.
When the <CANCEL DURING TX/RX?>
message appears, press [ ] to select
<YES>.
●
To Next Page
Loading...
