Canon imagePress C710 - Automatic Feeder Cleaning; Cleaning the Inside of the Main Unit

21
Cleaning and Maintenance
▀
Automatic Feeder Cleaning
If originals which are fed from the feeder become dirty, follow the procedure below.
1
Place 10 sheets of blank paper into the feeder.
•
Use A4 plain paper.
2
Press .
3
Press [Adjustment/Maintenance]  [Maintenance]  [Clean Feeder].
4
Press [Start].
▀
Cleaning the Inside of the Main Unit
If output paper becomes dirty, follow the procedure below.
1
Press .
2
Press [Adjustment/Maintenance]  [Maintenance]  [Clean Inside Main Unit].
3
Press [Start].
N
O
TE
•
Similarly perform [Adjustment/Maintenance]  [Maintenance]  [Clean Wire] and [Adjustment/Maintenance] 
[Maintenance]  [Clean Roller].
•
Paper may be cleaned by performing [Adjustment/Maintenance]  [Maintenance]  [Clean Belt]. After loading three
or more sheets of plain paper into the upper paper drawer of the main unit, perform the above procedure.