Setting Item Description, Instructions
Main-
te-
nance
Head Cleaning Clean the Printhead. (See "Cleaning the Print-
head.") →P.796
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all,
or if printing is not improved by Head Cleaning A.
Nozzle Check Print a test pattern to check the nozzles.
Replace P.head When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.") →P.797
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Repl. maint cart When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.804
Head Info Indicates information about the printhead.
GL2
Set-
tings
Quali-
ty
Man-
ager
Color
Mode
Monochrome Print in monochrome.
Color (CAD) 1 Print in standard colors.
Color (CAD) 2 Print in brighter colors.
Color (CAD) 3 Print emulating the following printers, in colors re-
sembling colors produced by these printers: Canon
BJ-W3000/W3050.(*2 →P.728 )
Color (CAD) 4 Print emulating the HP Designjet 500/800, in colors
resembling colors produced by these printers.
(*2 →P.728 )
Color (CAD) 5 Print emulating the HP Designjet 1000, in colors re-
sembling colors produced by this printer.
(*2 →P.728 )
Print Quality Choose the print quality.
Input Resolution Choose the printer input resolution, 600dpi or
300dpi.
Print (Economy) Although printing quality is diminished, less ink is
consumed than in regular printing. Select On to con-
serve ink.
Paper
Man-
ager
Paper Source Choose the source of paper for HP-GL/2 printing.
Margin Specify the margin around paper. The margin for the
trailing edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in
Paper Details, the value in Paper Details has priori-
ty.
Conserve Paper Conserves paper when printing.
Auto Rotate If the long side of an original is shorter than the roll
width, the original is automatically rotated 90 degrees
to conserve paper. Similarly, if the long side of an
original in landscape orientation is longer than the
roll width and the short side is shorter than the roll
width, the original is repositioned to fit on the paper.
Printer Parts
>
Control Panel
>
iPF755 Menu Settings
9
721
To Next Page
Loading...
Need help?
General
