EasyManuals Logo

Canon imagePROGRAF iPF760 User Manual

Canon imagePROGRAF iPF760
686 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #528 background imageLoading...
Page #528 background image
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press or to select Interface Setup, and then press the OK button.
4
Press or to select TCP/IP, and then press the OK button.
5
Press or to select IPv4, and then press the OK button.
6
Press or to select IPv4 Settings, and then press the OK button.
7
Press or to select IP Address, and then press the OK button.
8
After you press or to select the input field, numerical input is possible.
9
Press the or button to enter the value.
Note
Pressing the button increases the number by 1. The maximum value is 9, after which 0 is displayed.
Pressing the button decreases the number by 1. The minimum value is 0, after which 9 is displayed.
Hold down or to increase or decrease the value continuously.
Make sure the IP address you enter for the printer is not the same as any computer IP address in your network.
10
Repeat steps 8 and 9 to complete the settings, and then press the
OK button.
11
Press the Menu button.
If you have changed the settings, a confirmation message is
displayed. Press or to select Yes, and then press the OK
button.
Important
Be sure to complete step 11. This will activate the values you have entered.
If an error message is displayed, check the settings and correct any invalid values.
Note
You can also specify the subnet mask and default gateway on the Control Panel.
Configuring the IP Address Using ARP and PING Commands
Configuring the IP Address Using ARP and PING Commands
This topic describes how to configure the IP address using ARP and PING commands.
Configuring the IP Address Using ARP and PING Commands
iPF760
User's Guide
Network Setting Initial Settings
528

Table of Contents

Other manuals for Canon imagePROGRAF iPF760

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF760 and is the answer not in the manual?

Canon imagePROGRAF iPF760 Specifications

General IconGeneral
ColorYes
Printing colorsBlack, Cyan, Magenta, Pigment matte black, Yellow
Print technologyInkjet
Maximum resolution2400 x 1200 DPI
Number of print cartridges5
Page description languagesGARO, HP-GL/2, HP-RTL
Media thickness0.8 mm
Maximum print size-
Maximum roll length18 m
Media width (rolls)254 - 914.4 mm
Media width (sheets)203.2 - 917 mm
Maximum roll diameter150 mm
ISO A-series sizes (A0...A9)A0, A1, A2, A3
ISO B-series sizes (B0...B9)B1, B2, B4
CertificationCE, RoHS, ECO, WEEE
Sound power level (standby)35 dB
Sound pressure level (printing)50 dB
USB connectorUSB Type-A
USB 2.0 ports quantity1
Ethernet interface typeGigabit Ethernet
Sustainability certificatesENERGY STAR
Power requirements100 - 240V, 50/60Hz
Power consumption (standby)0.5 W
Power consumption (typical)140 W
Operating temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)10 - 80 %
Compatible operating systemsWindows XP/Server 2003/Server 2008/Vista/7\\r Mac OS 10.5 - 10.7.x
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)1304 x 1100 x 1062 mm

Related product manuals