121
x Image Playback
You can rotate the image to the desired orientation.
1
Select [Rotate].
Under the [3] tab, select [Rotate],
then press <0>.
2
Select the image.
Turn the <5> dial to select the
image to be rotated.
You can also select an image on the
index display.
3
Rotate the image.
Each time you press <0>, the image
will rotate clockwise as follows:
90° → 270° → 0°
To rotate other images, repeat steps 2
and 3.
To exit the image rotate and return to
the menu screen, press the
<M> button.
b Rotating an Image
If you have set [5 Auto rotate] to [OnzD] (p.130) before taking the
vertical shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set the [5 Auto rotate] menu to [OnzD].
To Next Page
Loading...
