29
Load a fully charged LP-E4 battery pack into the camera.
1
Remove the battery compartment
cap.
Grasp both sides of the cap and pull it
out.
2
Insert the battery.
Insert the battery firmly all the way,
and turn the release handle as shown
by the arrow.
When the power switch is set to <1> (p.36), the battery level will be
indicated in one of six levels:
Installing and Removing the Battery
Installing the Battery
Checking the Battery Level
Icon
Level (%)
Indication
z
100 - 70 Sufficient battery level
H
69 - 50 Battery level exceeds 50%
m
49 - 20 Battery level below 50%
x
19 - 10 Battery level is low
b
9 - 1
Battery will be exhausted soon
n
0 Recharge the battery
Select the [6 Battery info.] menu to see the detailed battery information.
(p.187)
To Next Page
Loading...
