77
The file name has four alphanumeric characters
followed by a four-digit image number (p.79) and
extension. The first four alphanumeric characters
are set upon factory shipment and unique to the
camera. However, you can change it.
With “User setting1,” you can change and register the four characters as
desired. With “User setting2,” if you register three characters, the fourth
character from the left will be appended automatically to indicate the
image size.
1
Select [File name setting].
Under the [5] tab, select [File name
setting], then press <0>.
2
Select [Change User setting].
Turn the <5> dial to select [Change
User setting*], then press <0>.
3
Enter any alphanumeric
characters.
With User setting1, enter 4 characters.
With User setting2, enter 3 characters.
Operate the <
5
> dial or <
9
> to move
the cursor to the right of the character to
be deleted. Then press the <
L
> button
to delete the character.
Press the <H> button, and the text
palette will be highlighted in a color
frame and text can be entered.
3 Changing the File Name
Registering the File Name (first 4 characters)
(Ex.) 7E3B0001.JPG
To Next Page
Loading...
