96
In this mode, you set the desired aperture and the camera sets the
shutter speed automatically to obtain the correct exposure suiting the
subject brightness. This is called aperture-priority AE.
A higher f/number (smaller aperture hole) will make more of the
foreground and background fall within acceptable focus. On the other
hand, a lower f/number (larger aperture hole) will make less of the
foreground and background fall within acceptable focus.
* <f> stands for Aperture value (aperture opening).
1
Select <f>.
Press the <W> button and turn
the <6/5> dial to select <f>.
2
Set the desired aperture.
While looking at the top LCD panel,
turn the <6> dial.
3
Focus the subject.
Press the shutter button halfway.
X The shutter speed is set
automatically.
4
Check the viewfinder display and
shoot.
As long as the shutter speed is not
blinking, the exposure will be correct.
f: Aperture-Priority AE
With a large aperture opening With a small aperture opening
To Next Page
Loading...
