Canon MARK III EOS-1 DS - About the Symbols

58
A Selecting a Picture Style
Monochrome
For black-and-white images.
User Def. 1-3
You can select a base Picture Style such as [Portrait] or
[Landscape], adjust its parameters as desired and register it under
[User Def. 1] to [User Def. 3]. Any User Defined Picture Style which
has not been set will have the same settings as the Standard Picture
Style.
The symbols on the upper right of the Picture Style selection screen
refer to parameters such as [Sharpness] and [Contrast]. The numerals
indicate the parameters settings, such as [Sharpness] and [Contrast],
for each Picture Style.
Symbols
About the Symbols
To obtain natural-looking, black-and-white images, set a suitable
white balance.
With JPEG 3/4/5/6 images, color cannot be restored to the
black-and-white image. Do not use this Picture Style if you want color
JPEG images. When [Monochrome] is selected, <0> will appear
on the rear LCD panel.
g Sharpness
h Contrast
i
Saturation
j
Color tone
k
Filter effect (Monochrome)
l
Toning effect (Monochrome)
COPY