Canon MF269dw - Printing Results Are Not Satisfactory

Printing Results Are Not Satisfactory
2KUS-08S
Dirt inside the machine may affect printing r
esults. Perform care and cleaning to the machine rst.
Regular
Cleaning
(P. 433)
Smudge Marks Appear on the Edge of Printouts
Are you using appropriate paper?
● Check
the supported paper types and replace with an appropriate type. Also, set the paper size and type
correctly.
Available Paper(P. 538)
Loading Paper(P. 132)
Specifying Paper Size and Type(P. 145)
Do you print data without margins?
● This
symptom occurs if a margin is set to none in the printer driver. A margin of 5 mm or less around the
edge of paper or 10 mm or less around the edge of envelopes is not printable with the machine. Make
sure to have margins around the document to print.
[Finishing] tab
[Advanced Settings] [Expand Print Region and Print] [Off]
Smudges Appear on Printouts
Are you using appropriate paper?
● Check usable paper, and r
eplace with appropriate paper.
Available Paper(P. 538)
Loading Paper(P. 132)
● If
using the appropriate paper still does not solve the problem, changing the <Special Printing Mode A> or
<Special Printing Mode Z> setting may solve the problem. <Mode 2> can improve the quality more
signicantly than <Mode 1>.
Troubleshooting
479