COPIER > FUNCTION > INSTALL
Item Description
Related service mode COPIER > FUNCTION > INSTALL > ERDS
COPIER > FUNCTION > INSTALL > RGW-PORT
COPIER > FUNCTION > INSTALL > COM-TEST
COPIER > FUNCTION > INSTALL > COM-RSLT
COPIER > FUNCTION > MISC-P > ERDS-LOG
Supplement/memo Embedded-RDS: Function to send device information such as the device counter, failure, and con-
sumables to UGW via SOAP protocol
UGW (Universal Gate Way): Remote monitoring service system
OPTION
■ BODY
COPIER > OPTION > BODY
Item Description
LOCALE
Title Setting of location
Details To set the location. At installation in areas other than Japan, perform the following procedure to match the
setting information with that of the location.
Use case • At installation
• When changing the location information
Adj/set/operate method 1. Enter the setting value under LOCALE, and then press Apply key.
2. Set the paper size configuration under SIZE-LC.
3. Execute COPIER > FUNCTION > CLEAR > ALL.
4. Turn OFF/ON the main power switch.
Caution Since COPIER> FUNCTION> CLEAR> ALL is executed when changing the location, the setting informa-
tion of user mode, service mode, etc. is initialized. The setting information of this item is not initialized.
Display/adj/set range 1 to 10
1 : Japan
2 : North America
3 : Korea
4 : China
5 : Taiwan
6 : Europe
7 : Asia
8 : Oceania
9 : Brazil
10 : Latin
Default value 1
Related service mode COPIER> FUNCTION> CLEAR> ALL
COPIER> OPTION> BODY> SIZE-LC
SIZE-LC
Title Setting of paper size configuration
Details To set the paper size configuration. At installation in areas other than Japan, perform the following proce-
dure to match the setting information with that of the location.
Use case • At installation
• Upon user's request
Adj/set/operate method 1. Set the location under LOCALE.
2. Set the paper size configuration under SIZE-LC, and then press Apply key.
3. Execute COPIER > FUNCTION > CLEAR > ALL.
4. Turn OFF / ON the main power switch.
Caution Since COPIER > FUNCTION > CLEAR > ALL is executed when changing the location, the setting infor-
mation of user mode, service mode, etc. is initialized. The setting information of this item is not initialized.
Display/adj/set range 1 to 4
1 : AB configuration
2 : Inch configuration
3 : A configuration
4 : AB / Inch configuration
8. Service Mode
290
To Next Page
