Canon XA30 - Page 143

Wi-Fi Connection Using an Access Point
143
7 In the [Default Gateway] field, touch [0.0.0.0] and then touch [Í]/[Î] to change the value
and then touch [Next].
• Touch the next field to change the value, as necessary.
8 Touch [Next].
9 For the [Primary DNS Server] and [Secondary DNS Server] fields, touch [0.0.0.0] and then
touch [Í]/[Î] to change the value and then touch [Next].
• Touch the next field to change the value, as necessary.
10 Touch [Next].
11 Touch [OK].
• After the connection is established, continue using the function you were previously using. For
details, refer to the procedure in Playback on a Computer (A 138), Transferring Files to a
Computer or FTP Server (A 139) or Viewing and Changing Wi-Fi Settings (A 144), as
necessary.
NOTES
• The Wi-Fi functions available and the setup method will vary depending on the specifications and
characteristics of the Wi-Fi network you want to use.