Recording Audio
87
POINTS TO CHECK
•Set [— Audio Scene] to [„ Custom Setting] (A 84).
1 Open the [Built-in Mic Att.] screen.
[FUNC.] > [MENU] > p > [Built-in Mic Att.]
2 Touch the desired option and then touch [X].
Options
(
Default value)
Audio Equalizer (Built-in Microphone)
You can use the audio equalizer to adjust sound levels by specifically targeting the high- or low-
frequency range and selecting one of 3 available levels.
POINTS TO CHECK
•Set [— Audio Scene] to [„ Custom Setting] (A 84).
1 Open the [Built-in Mic Freq. Response] screen.
[FUNC.] > [MENU] > p > [Built-in Mic Freq. Response]
2 Touch the desired option and then touch [X].
Options
(
Default value)
Microphone Directionality (Built-in Microphone)
You can change the directionality of the built-in microphone to have more control over how sound is
recorded.
[2 Automatic]
The camcorder will automatically activate the built-in microphone attenuator as
necessary for optimal audio recording levels so high audio levels will not be distorted.
[i On] The built-in microphone attenuator will be activated at all times to reproduce more faithfully
the sound dynamics. å will appear on the screen.
[j Off] The built-in microphone attenuator will be deactivated at all times. will appear on the
screen.
Operating modes:
[
h
Normal]
Appropriate for balanced sound under most normal recording conditions.
[ç Boost LF Range] Accentuates the low-frequency range for more powerful sound.
[è Low Cut Filter] Filters the low-frequency range to reduce the noise of blowing wind, a car’s
engine and similar ambient sounds.
[é Boost MF Range] Best for recording human voices and dialog.
[ê Boost HF+LF Range] Best, for example, for recording live music and clearly capture the special
sound characteristics of a variety of instruments.
Operating modes:
To Next Page
Loading...
