3
39
English
ASSIGNING PRESET 1–3
The Sounddeck 100 is able to assign three memory buttons with „presets“.
Settings like volume, selected input and settings in the Speaker Setup [SPS]
menu (sound settings, etc.) as well as playlists from the app „Spotify“ can be
stored.
Practical tip:
• We recommend you to store the settings you have made in the loud-
speaker menu during the initial set-up of the Sounddeck 100, e.g.
regarding loudspeaker levels and distances, sound settings, etc., to one
of the preset buttons so that your settings are not overwritten by the
(neutral) factory settings if you accidentally press one of these three
preset buttons.
To store playlists and/or (sound)settings, please proceed as follows:
1
Please apply the desired settings regarding volume, sound, input, etc. and
press and hold the memory button 1, 2 or 3 until the corresponding number
[P1], [P2] or [P3] is shown in the display and no longer flashes.
2
To store a playlist, please open the desired playlist on the app „Spotify“ on
your (mobile) device and start playback. Be sure to select Spotify Connect
as your connection to the Sounddeck 100, not Chromecast built-in. Now,
press and hold the corresponding memory button 1, 2 or 3 until the corre-
sponding number [P1], [P2] or [P3] is shown in the display and no longer
flashes. Storing a playlist automatically stores all (sound)settings, too.
3
To recall the settings resp. a playlist from these presets, please press the
corresponding button 1, 2 or 3 briefly. The settings are then called up, resp.
the tracks from the stored playlist are played back automatically by the
Sounddeck 100 (even without using your (mobile) device).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
