Canton Smart Sounddeck 100 Short Manual

3
41
English
Note:
• In a home theatre setup, the Sounddeck 100 is always the „master
speaker“, all other speakers are defined as „slave speakers“. and controlled
by the Sounddeck 100.
AUTOMATIC UPDATES
After you have connected the Sounddeck 100 to the network, firmware up-
dates are executed automatically. After each connection to the power supply
and at regular intervals (also in standby mode), the Sounddeck 100 searches
for an update and installs it, if available. The LED flashes green/red during the
update and the display first shows „DOWNLOADING“, then „UPDATING“. Du-
ring this time the Sounddeck 100 is not operable.
To do this, the Sounddeck 100 must have been connected to the network
router via the Google Home app or an iOS device (by use of WLAN) or
alternatively by a network cable (by use of LAN).
Caution:
• Do NOT disconnect the Smart Sounddeck 100 from the power supply
during an update process!
FURTHER FUNCTIONS AND NOTES
The Sounddeck 100 contains a multitude of other great functions. All settings
can be found in the detailed instruction manual. This can be found under:
www.canton.de/manual/sounddeck100

Canton Smart Sounddeck 100 Specifications

General

Audio decoders	Dolby Atmos
RMS rated power	- W
Audio output channels	- channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDCP version	2.2
HDMI ports quantity	4
Connectivity technology	Wired
Product color	Black
Wall mountable	No
Audio formats supported	DTS

Weight and Dimensions

Width	- mm
Soundbar weight	- g