CanyCom CM 2103 - Details of Tool Bag

- 14 -
Product Specications
Model/Type CM2103
Travelling performance
Travelling
speed
Number of
speeds
F (Forward) - HST(variable speed)
R (Reverse) - HST(variable speed)
Low km/h 0 - 6.7
High km/h 0 - 10.0
Stability
inclination angle
(No-load)
Left degree 45
Right degree 45
Minimum turning radius m 1.9
Grade ability degree 25
Transmission oil capacity liters 2.0
Differential oil capacity liters 0.36
Power transmission
device
Main speed shift - HST
Steering device - Rack and pinion type round steering wheel
Brake type - Internal expanding type brake
Tire
Front wheel - 4.00-7
Rear wheel - 17 × 8.00-8
Cutter blade
Cutter blade width mm 900
Cutter blade height mm 20 - 100 (free stage)
Blade type - Free knife & stepped stay
Amount of slide of cutter blade mm 150
* These specifications are subject to change without notice, for product improvement.
5.2 Details of Tool Bag
 Part name Quantity Remarks
1 Operator's manual 1 This book
2 Instruction manual for engine 1
3 Plug wrench 1
4
Closed wrench
1