CanyCom CM 2103 - Fuel; Grease; Lubricant; Fluid Chart

- 32 -
Maintenance
Item Timing Recommendation Amount
Reference
page
Fuel As necessary. Gasoline
15.0
liters
See page 15
Engine oil
Add : Check daily and add
as necessary.
Replace :
1st time after 8
operating hours
2nd time and later : every
50 operating hours (about
every week)
API class : SE or higher
#20~#30
SAE class: 10W-30
1.5
liters
See page 34
Transmission oil
1st time after 50
operating hours
2nd time and later : every
500 operating hours
Gear oil
API class GL4 or 5
SAE class #80
2.0
liters
See page 35
HST oil Every 500 operating hours
Engine oil
SAE class: 20W-50
3.0
liters
See page 37
Oil for the cutter blade
counter case
-
Gear oil
API class GL4 or 5
SAE class #80
0.39
liters
Oil for upper case for
blade
-
Gear oil
API class GL4 or 5
SAE class #80
0.83
liters
Front differential gear
oil (center)
-
Gear oil
API class GL4 or 5
SAE class #80
0.36
liters
See page 36
Front knuckle gear oil
(both sides)
-
Gear oil
API class GL4 or 5
SAE class #80
Each
0.05
liters
See page 36
Each area to be
lubricated
Every six months.
* No need for lubrication for
the first 6 months after
purchase
Gear oil
API class GL4 or 5
SAE class #80
-
See page 38
Each area to be
greased
Every six months.
* No need for greasing for
the first 6 months after
purchase
Chassis grease -
See page 38
Battery fluid
Check every month and add
as necessary.
Distilled water -
See page 39
7.2 Fuel / Grease / Lubricant / Fluid Chart