CanyCom CM 2103 - Page 36

- 30 -
Maintenance
Item Action Acceptable condition
Timing
Remarks
Per-operation
Monthly
Yearly
Engine
Body
Compressing
pressure
* Check compression pressure.
* This check is not needed if no
abnormality is found in engine
operation and exhaust condition
at idling and acceleration.
Proper pressure.
○
Please
contact your
CANYCOM
distributor
Engine
mount
* Check engine base for cracks
and deformation.
No cracks or
deformation.
○ ○ ○
* Check bolts and nuts for
looseness or missing parts.
No looseness or
missing parts.
○ ○ ○
Lubricating
system
* Check oil level and
contamination.
Proper amount.
No severe dirt.
○ ○ ○
Inspection / Replacement:
(See page 34)
* Check head cover, oil pan, and
pipes for oil leak.
No severe oil leak.
○ ○ ○
Fuel system
* Check fuel tank, injection pump,
hose, and pipes for fuel leak.
No fuel leak.
○ ○ ○
* Check fuel hose for damage
and deterioration.
No damage or
deterioration.
○ ○ ○
* Check fuel filter element for dirt
and clogging.
No severe dirt.
No clogging.
○ ○
Electrical
Ignition
plug
* Check electrode for wear and
carbon deposit.
No wear or carbon
deposit.
○
Inspection / Cleaning:
(See page 41)
Battery
* Check electrolyte level. Proper amount.
○ ○
Inspection / Adding:
(See page 39)
* Check terminals for looseness
and corrosion.
No looseness or severe
corrosion.
○ ○
Wiring
harness
* Check connections for
looseness
No damage.
○ ○
* Check wiring harness for
damage.
No looseness.
○ ○
Power train
V-belt
* Check appearance for cracks,
damage, and dirt.
No cracks, damage, or
grease deposit.
○ ○
Inspection:
(See page 43)
* Check belt tension. Proper tension. ○ ○
Transmission
* Drive vehicle forward and
backward, and check operating
condition and check for
abnormal noise and overheat.
Normal operation.
No abnormal noise or
overheat.
○ ○ ○
* Check oil level in case. Proper amount.
○ ○
Inspection / Replacement:
(See page 35)
* Check oil for contamination. No severe
contamination.
○ ○
Inspection / Replacement:
(See page 35)
* Check case for oil leak. No oil leak.
○ ○
Speed adjustment
Accelerator
lever
* Check if the lever fits into each
speed position and moves
smoothly when driving.
Proper fitness to each
position and proper
movement of the lever.
○ ○ ○
* Check connection for looseness
or rattle.
No looseness or rattle.
○ ○ ○
HST Pedal
* Check the movement of HST
pedal when driving.
Proper and smooth
movement.
○ ○ ○
* Check connection for looseness
or rattle.
No looseness or rattle.
○ ○ ○