Operation
-24-
4
5347M-0402-010E
Brake Pedal
Brake Lock Lever
1. Make certain brake pedal is depressed and
locked. If it is not, depress brake pedal and
pull lock lever to lock it.
• Safety feature: engine cannot be started
unless brake pedal is depressed.
5347M-0402-020E
Cutting Rotery
Clutch Lever
2. Make sure cutting rotary clutch lever is in
[OFF] position.
• Safety feature: engine cannot be started
unless cutting rotary clutch lever is in [OFF]
position.
53327M-0402-030E
Auxiliary
Transmission
Shift Lever
L
H
N
3. Make certain auxiliary transmission shift
lever is in [N (neutral)] position.
NOTE
NOTE
• Do not use this machine in the altitude above 1500m (4920ft.) in its original
configuration. This machine cannot perform adequately above that altitude.
Using this machine under such conditions may result in an accident or cause
damage to machine. If you need to use this machine above that altitude, contact
your CANYCOM representative.
To Next Page
Loading...
