CanyCom CMX186 - Chassis

Maintenance
-42-
5
• Perform a pre-startup inspection (PSI) before each use, a monthly inspection once a
month, and a yearly inspection once a year.
• Some maintenance procedures described below may require special knowledge
or tools and instruments. Contact your CANYCOM representative to perform such
procedures.
Chassis
Item Description
Schedule
Note
PSI
Mon
Year
Drive Train
Tires
Tires shall be inflated to the specified
pressure.
√ √ √
Page 59
Tires and wheels shall be free of crack,
damage, or uneven wear.
√ √
Wheel bolts shall not be loose or missing.
√ √ √
Wheel bearings do not exhibit excessive play
and no irregular noise or overheating shall
be observed.
√ √
Transmission
Irregular noise or overheating shall not be
observed when moving forward or backward.
√ √
There shall not be oil leaks in or around
transmission.
√ √
Auxiliary
Transmission
Transmission can be shifted to either position
positively and performs normally.
√ √
Lever shall not be loose or have excessive
play.
√ √
Front Axle
Irregular noise or overheating shall not be
observed when traveling.
√ √
There shall not be oil leaks in or around front
differential case or knuckles.
√ √
HST
HST shall perform normally.
√ √ √
Hydraulic fluid shall be filled to a proper
level and shall be clean and free of dirt or
contamination.
√ √
Page 61
Lever or pedal shall not be loose or have
excessive play.
√ √