Maintenance
-46-
5
Greasing Points
• Grease regularly. Insufcient greasing may result in seizure or rusting, affecting
smooth operation of machine.
• When using a manual grease pump, push handle five to six times. When handle
becomes heavy, stop pushing.
• When using a pneumatic grease pump, charge for two to three seconds.
• Set cutting rotary height to the lowest to grease link pivots.
NOTE
Location Schedule Grade
1 Propeller shaft Every 6 Months Chassis Grease
2 Cutting rotary link pivots Every 6 Months Chassis Grease
3 Cutting rotary drive shaft Every 6 Months Chassis Grease
Greasing Points (CMX 227H / CMX 186H)
5332M-0503-010E
To Next Page
Loading...
