CanyCom CMX186 - Page 65

Maintenance
-56-
5
Upper Limit
Lower Limit
5321M-0506-020E
5. Visually inspect oil level. Make sure oil level
is between upper and lower limits. If it is
below lower limit, add oil.
6. Visually inspect condition of oil. If it is too
dirty or viscosity is not normal, change oil.
7. Put dipstick back in place.
8. Close engine hood.
5332M-0506-030E
Oil Filler Cap
Filling
1. Open engine hood.
2. Remove oil ller cap.
3. Fill specied amount of correct oil into ller.
4. Check oil level. Make sure oil level is
between upper and lower limits.
5. Put oil ller cap back in place.
6. Close engine hood.
Changing
1. Have an appropriate oil drain pan.
2. Open engine hood.
3. Remove oil ller cap.
4. Remove drain plug to drain oil.
5. Put drain plug back in place.
6. Fill oil.
7. Check oil level and to make sure oil level is
appropriate.
8. Put oil ller cap back in place.
9. Close engine hood.
5347M-0506-040E
Drain Plug
Oil Drain Pan