CanyCom SC45 - Page 22

Specications
-12-
3
Model and Type
SC 45
One-way Dump
Performance
Speed
Forward 1st km/h (mph) 0.5 (0.3)
Forward 2nd km/h (mph) 0.8 (0.5)
Forward 3rd km/h (mph) 1.4 (0.9)
Forward 4th km/h (mph) 2.0 (1.2)
Forward 5th km/h (mph) 3.3 (2.1)
Forward 6th km/h (mph) 5.3 (3.3)
Reverse 1st km/h (mph) 0.7 (0.4)
Reverse 2nd km/h (mph) 2.5 (1.6)
Minimum Turning Radius m (ft) 1.2 (3.9)
Gradeability Degrees 20 (Unload)
Drivetrain
Clutch Belt Tension
Main Transmission Gear Slide
Auxiliary Transmission Gear Slide
Steering Mechanism Dog Clutch
Brake Internally Expanding
Transmission Oil Capacity
L (US qt)
1.5 (1.59)
Hydraulic System
System Dump
Pump Type Gear pump
Rated Discharge L (US qt)/min 3.85 (4.07)
Relief Pressure MPa(kgf/cm
2
) 13.7 (140)
Cylinder (Bore X Stroke)
mm (in)
55 X 200 (2.17x7.87)
Hydraulic Fluid Capacity
L (US qt)
0.6 (0.63)
Dump Angle Degrees 90
Lift Speed (up) Sec 6.2
Lift Speed (down) Sec 4.6
{ } indicates when handle lever is in the high position.
*These specications are subject to change without notice.