CanyCom SC45 - Page 62

Troubleshooting
-52-
6
Area Malfunction Possible Cause Corrective Measure Ref.
Drive Train
Machine does not turn
smoothly.
Improperly adjusted side
clutch.
→Adjust side clutch Page 43
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Irregular noise or
abnormal heat from
roller, sprocket, or idler.
→Please contact
your CANYCOM
representative.
Brake
Brake does not work
well.
Improperly adjusted
brake.
→Adjust brake. Page 42
Brake is wet with water. →Apply brake a few
times to dry.
Excessive load →Reduce load.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Track
Track does not move
smoothly.
Improperly adjusted
track.
→Adjust track. Page 39
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Hydraulic
(Dump
system)
Dump or turn does not
work.
Insufcient or
deteriorated hydraulic
uid.
→Add or change uid. Page 44
Loose hydraulics belt. →Adjust. Page 45
Other (other than the
above).
→Please contact
your CANYCOM
representative.