■
Page 29 of 61
Spring preload adjustment
As shown on Page 27, the support force of shock absorber can be adjusted by manually rotating
the blue adjusting knob of spring preload at the top of the left front shock absorber.
● Rotate the knob clockwise to increase the support force; rotate it counterclockwise rotation
to reduce the support force.
● The adjustable height of spring preload is 12.5mm, and the spring adjusting knob is rotated
by one turn to lift up the preload by 1.25mm;
● When adjusting, the force applied should be moderate, and the adjustment stopped
immediately in case of slight resistance, so as not to exceed the bearing limit of the adjusting
screw.
● The spring weight is 40LBS, and the spring preload of 12.5mm can increase the supporting
force by 8.5KG;
The greater the spring preload, the higher the
damping characteristics of rebound. In actual
application, the preload value of the spring cannot
be accurately recorded as a number (the rotation
position depends on different environments and
personal feelings).
Comfort +0
Standard +0
Sports +3
To Next Page
Loading...