Brake System Maintenance
Brake disc inspection
Warning: Excessive wear of the brake disc will reduce the braking effect, resulting in casualties or motorcycle damage.
The worn
brake disc shall be replaced immediately.
Brake disc
thickness
Page 46 of 61
Warning: Excessive wear of the brake disc will reduce the braking effect, resulting in casualties or motorcycle damage.
brake disc shall be replaced immediately.
ā Inspection method:
Measure the disc thickness at multiple points on the front and rear brake discs,
as wear will reduce disc thickness within the contact area of the brake
the thickness is lower than the limit, the disc shall be replaced.
Check whether the brake disc is deformed, damaged or cracked, and replace it if
any.
Limit wear of brake disc:
Front brake disc: 1.5mm
Rear brake disc: 1.7mm
Warning: Excessive wear of the brake disc will reduce the braking effect, resulting in casualties or motorcycle damage.
Measure the disc thickness at multiple points on the front and rear brake discs,
as wear will reduce disc thickness within the contact area of the brake
shoe. If
the thickness is lower than the limit, the disc shall be replaced.
Check whether the brake disc is deformed, damaged or cracked, and replace it if
To Next Page
Loading...