Introduction
Chapter 1: Introduction
This Manual
This manual includes operation, maintenance, and installation information for the system you
purchased.
Make sure that all personnel have read this manual and that they thoroughly understand the safe
and correct operation and maintenance procedures. Failure to do so could result in personal injury or
equipment damage.
This manual should be considered a permanent part of your system and should remain with the
system at all times and when you sell it.
Right and left sides of the system are determined by facing the direction of forward travel of the
machine on which the system is installed.
The information, screenshots, and other illustrations were correct at the time of publication. Changes
can occur without notice.
This manual contains important information on how to safely and correctly install, operate, and
maintain CapstanAG products. These instructions will help keep personnel safe, reduce downtime,
and increase the reliability and life of the equipment, its components, and related systems.
Review the safety information in the manual(s) from the Original Equipment Manufacturer (OEM).
Follow the instructions (in this manual) and in the OEM manual(s) for each step, to make sure that
work conditions in and around the OEM equipment are safe.
It is important for all individuals working with chemicals to understand the potential risks, necessary
safety precautions, and proper response in the event of accidental contact.
Review the OEM manual(s) for chemical safety information.
Read, understand, and review the procedures in this manual and OEM manual(s). Use the Safety
Data Sheets (SDS) and the required Personal Protective Equipment (PPE) for hazardous chemicals.
Please keep this manual and all enclosed documentation in an accessible location known to all
operators, installation, and maintenance personnel.
If you do not understand the CapstanAG equipment after reading this manual, please obtain the
proper training before working with equipment, to make sure that your own safety, as well as your co-
workers’ safety, is maintained.
Do not attempt to operate any equipment or system until you completely understand why, when, and
how it operates. If you are uncertain after studying this manual, please contact CapstanAG.
System Identification
Write the system name, serial number, and other information down in the Service Contact Information
on the inside cover of this manual. Your dealer will use these numbers when you order parts. File a
copy of the identification numbers in a secure place off the machine.
If you are not the original owner of this machine, it is in your interest to contact your local CapstanAG
dealer to inform them of this unit's serial number. Providing this information will help CapstanAG
notify you of any issues or product improvements.
©
2020 Capstan Ag Systems, Inc. 7 PinPoint
™
II
To Next Page
