8200-0753-0M Rev A 225D Weight Digital Indicator
3. The following information is available:
A. IP address (if available).
B. Ethernet cable state – “ETHERNET DETECTED” or “ETHERNET NOT
DETECTED”.
C. The status of the connection. The following statuses should occur in order while
making a connection after boot up:
a. WAITING FOR SOCKET INIT
b. IP BINDING
c. DNS RESOLVING SERVER IP
d. COMM ESTABLISHED – OR—PORT CONNECT FAIL
D. Once there is a connection to the web server, the previous HTTP response will
be displayed:
a. A good response is “HTTP RESP = 200 OKAY”.
b. Any other response means there is a problem. Many issues are causes
the SO# not being entered in the indicator, “HTTP RESP = 404 CHECK
SO# IN 225 SETUP”.
To Next Page
Loading...
