3-6 9G3886_en 2011-03-31
Maintenance and Troubleshooting
Printer
Printer
Status
Display Screen Web Portal DICOM Status Description
Cover is open Code: 701
Power symbol is yellow
20701: Cover
Open
WARNING / COVER
OPEN
The top cover is open or one of
the side panels may be off. The
laser imager is not ready to
print.
Failed Power symbol is yellow Failed See Condition Code An error has occurred that
prevents printing.
Cartridge
closure is
requested
Power symbol is green
and/or flashing
Pause symbol is on
Not Ready Not Applicable The laser imager completes
any prints in progress before
closing the cartridge cover.
Offline Power symbol is yellow 20704: Printing
Disabled
WARNING /
PRINTER OFFLINE
The laser imager has been
disabled and does not have a
network connection.
Printing Power symbol is green
and flashing
Printing NORMAL The laser imager is currently
printing films.
Ready Power symbol is green
Film count displays
Ready NORMAL The laser imager is online and
the processor has reached
operating temperature.
Self-test Power symbol is yellow
and flashing
Code and film count are
replaced by dashes
Self-test WARNING /
PRINTER INIT
This occurs when power is
first applied to the laser
imager.
Service Mode Status code: 700
Power symbol is yellow
20700: Service
Mode
WARNING /
PRINTER OFFLINE
The service switch is enabled.
The laser imager is not ready
to print.
Warming Power symbol is yellow
and flashing
Number of minutes count
down until ready
Warming=xx WARNING / PROC
INIT
The processor is warming up
and will not be ready to print
for xx minutes.
To Next Page
Loading...
