45
MAINTENANCE OF THE CLEANER FILTER (90) (90)
This alarm does not block dispensing. The lter alarm can be excluded by set-
ting the litre value to zero.
CHANGE WATER FILTER
CAUSE CONSEQUENCE POSSIBLE SOLUTION
The volumetric meter has
reached the maximum value
of X litres of water supplied,
previously programmed.
None.
To cancel the alarm, see the Info-Re-
set section.
If the problem persis, contact Tech-
nical Support.
MAINTENANCE (92)
MAINTENANCE
CAUSE CONSEQUENCE POSSIBLE SOLUTION
The machine has reached the
number of programmed cy-
cles or the inspection date.
None. Contact Technical Support.
WASHING OF MILKER 1 - 2
This alarm does not have a numeric code.
MILKER X CLEANING
CAUSE CONSEQUENCE POSSIBLE SOLUTION
An operating date earlier than
today has been set.
None.
Correct the date in the setup menu.
To Next Page
Loading...
