163
APPENDIX H — TOUCH PILOT
™
WEB AND NETWORK INTERFACE PARAMETERS (cont)
Once the desired parameters have been specified, return to
the application by pressing the Back to application arrow in the
upper left corner of the Setup Menu window. The confirmation
dialog is displayed (Fig. E). Press the Save button to confirm
changes or the Revert button to discard changes.
NETWORK SETTINGS — You must request an IP address,
subnet mask and default gateway from the system administra-
tor before connecting the unit to the local Ethernet network.
The Network Menu allows the user to define network parame-
ters, including TCP/IP address. To access the menu, press the
Network field in the Setup Menu. The Network Settings screen
opens. See Fig. F.
NOTE: The Touch Pilot
™
does not support DHCP (Dynamic
Host Configuration Protocol). The unit cannot automatically
obtain the network parameters via a DHCP server.
To find and modify the unit IP address, follow these steps:
1. Press Network in the Setup menu.
2. In the Network Menu, press the TCP/IP Address arrow.
The TCP/IP Address dialog box is displayed. See Fig. G.
3. Enter the correct IP address for the unit.
4. Press OK to confirm, or press the Network arrow at the
top left of the screen to exit the dialog box without saving
the modification.
WEB CONNECTION SETTINGS — The Startup Connec-
tion menu provides options required for accessing the Touch
Pilot display from a remote network. To access the menu, press
the Web Connection field in the Setup menu and then select the
Edit Connect field. The remote host IP address, remote port
number, and remote PWD can be obtained by contacting the
site network administrator. See Fig. H and I.
Network
Web Connection
System
Display
Keyboard
Password
Language
1
2
3
4
5
6
7
Back to application
8
Setup
LEGEND
1—System properties for Ethernet interface
2—Additional network configuration properties
3—System settings such as software version, buzzer
4—Display settings such as contrast, backlight, timeout, rotation
5—Keyboard: Not applicable
6—Password for Setup Menu access
7—Language display for Setup Menu only
8—Select to return to application
Fig. D — Setup Menu
Save Changes
Revert
Some changes need to be saved!
What do you want to do?
Save
x
Fig. E — Save Changes Confirmation
a30-5901
Fig. G — TCP/IP Address Dialog Box
To Next Page
Loading...
