Carrier Connect 33CONNECTSTAT43FX - Specifications

What is the Carrier Connect™ 33CONNECTSTAT43FX Thermostat?
Carrier Connect™ Wi-Fi Thermostat 33CONNECTSTAT43FX CARRIER CORPORATION ©2021
Installation Guide All rights reserved
2
Specifications
Power requirements
24 Vac +/- 10% @ 3VA
Network Requirements
Wi-Fi connectivity supports Wi-Fi: 802.11 a/b/g/n standards on 2.4 GHz networks
Environmental
temperature range
Operating: 32° to 104°F (0° to 40°C)
Storage: -40° to 135°F (-40° to 57°C)
Humidity range
Operating: 10% to 95%, non-condensing, 32° to 104°F (0° to +40°C)
Storage: 10% to 95%, non-condensing
Connections
Connectors P104 and P105. 2 banks of “finger friendly” spring type terminal blocks
intended to be wired by the end-user or installer
Inputs
• C - connection
• R - connection
• H - 0-10 Volt input
• T - remote thermistor
Outputs
Connections: Y3, O/B, Y2, Y1, G, W1, and W2
Communications
485 signal: A+ and B
Mounting
Standard 4 x 2 in. electrical box using the 6-32 x 1/2 in. mounting screws and plastic
wall anchors provided
Overall dimensions
Width:
Height:
Depth:
5.15 in. (13.1 cm)
3.25 in. (8.2 cm)
0.95 in. (2.4 cm)
BACnet Support
Conforms to the BACnet Application Specific Controller (B-ASC) Device Profile as defined
in ANSI/ ASHRAE Standard 135-2012 (BACnet) Annex L, Protocol Revision 14
Listed by
FCC Part 15, Subpart J compliant